|
Installing Windows Me
Windows Me Installation Guide - Phase 1
The procedure for installing Windows Me onto a new PC is as
follows:
Switch on the PC and put the
Windows Me
CD into the CD-ROM. Press the reset button on the PC and
allow it to boot.
The PC should boot to the CD-ROM, if not check your
motherboard manual to enable 'Boot to CD-ROM' in its BIOS
settings.
From the next menu, select
Start Windows Me setup
from the CD-ROM
The system will load some basic software to enable it to
install
At the blue
Windows Me Setup screen, press
ENTER to
continue.
The system will check the HDD to determine if/how it is
configured
Select Configure
unallocated space (recommended) and press
ENTER
The system will 'Partition' the hard disk such that it can
prepare it for storing data
If prompted, select
Yes, enable large disk
support and press
ENTER
This enables the system to use the maximum space possible on
the hard disk
At the Setup will
restart now screen, press
ENTER or wait
and the system will automatically reboot
Phase One of the installation is complete and the system
needs to reboot to continue...
|