Preparing to build your own PC
Before starting to build your new PC, there are a number of
things you need to do, such that work can proceed smoothly
without too much interruption. Follow these steps before
moving on to the next section.
Work Area
Find a large, clean, well-lit work surface which has two or
more mains power outlets nearby (RCD
protected, if possible.) You will need space for your
monitor, keyboard and mouse and to lay your case on its
side, such that you can fit the components etc.
Tools
Collect together the necessary tools nearby, such that they
are close to hand. It is advisable at this stage to set up
your anti-static precautions.
Equipment
Make a collection of all your new components (still in their
packaging) and place them nearby, ready for use.
Set Up
Unwrap and carefully place your monitor (on its stand) on
the work surface, such that you can clearly view the screen.
Be careful when lifting monitors as they can be extremely
heavy. Ask someone for help if necessary.
Retrieve the power and signal (if supplied loosely) cables
from the packaging and fit them to the monitor as instructed
by its manual. Do the same with the keyboard, mouse and
speakers (if you have them) such that they are ready to be
used later on.
Do not connect any devices to the mains power outlet yet.
|